Yacht windshield open and close automatically at press a button
Still open your windshield by hand? Or never try to open your window to get fresh air and smell the sea breeze just because of the difficulty to open the window? From now on, just forget all these problem, Antuator will automate your window, windshield. Just press a button to open the window automatically and shake your body to enjoy the journey!
The ANT-35 stainless steel actuators with IP67 protection, salt water corrosion resistance, low noise 52dB will be the main performance.
Voltage12/24V
Load capacity100-2300N
Speed2.3-30mm/s
Stroke10-400mm
Out tube materialAluminum, stainless steel
Push rod materialstainless steel 316
Duty cycle10%
Working temperature-40-80℃
limit switchNO
Customization
Options:
Protection gradeIP66,IP67
Additional functionHall sensor, over current protection
Cable lengthActuator with hall sensor max length is 5m, with OCP or limit switches max length is 10m
Front mounting fixture“U” type or “O” type
Standard version 60dB, low noise version 52dB
On Request:
Customized stroke length available
Customized front and rear mounting fixture
FAQ
Is the stainless steel 316 or 304 for the actuators?
ANT-35 version is 316 stainless steel and ANT-45 is 304 stainless steel.
Will the push rod spin or not when the actuator push and pull?
The ANT-35 and ANT-45 actuators’ push rod will rotate when not fixed. If you need the push rod push and pull straightly, please try the ANT-38 or ANT-52 version.
Can the front or the rear mounting fixture be customized?
Yes. You may need offer the drawing to us for checking first. And the ball joint and universal joint can be offered as the mounting fixture.
Can the actuators be used under water?
No. The actuators can be used under water for a very short time but no long time working allowed.
Is there the limit switches for the stainless steel actuators?
Currently we do not have the limit switches for our stainless steel version actuators. We are using the over current protection circuit to stop the actuator at both ends. If limit switches is needed, please try to consider the ANT-38 or ANT-52 version with aluminum out tubes.
Is the limit switches adjustable?
No.
Can I connect my own switches to your synchronous controller?
Yes. Please just check the wire diagram for reference.
Do you offer any mounting brackets for the actuators?
Yes. For samples, we will only offer the actuators with bare wires, so you can use your own connector. But for bulk orders, we can use the connector you requested.
Can the actuators be operated manually when the power is failed?
All the standard actuators will have self-locking force. So when power is off, the actuators cannot be operated by hand. If in your project there is no need the self-locking force, please confirm with our people, then we can customize the actuator without self-locking force and the push rod can be moved manually.